Call Today

 

 

Just about everyone seems to have their own unique way of thinking with regards to What Would Cause My Electric Water Heater to Stop Working?.

Several modern-day houses make use of an electric hot water heater for their heater, because of its benefit and convenience of use. Nevertheless, much like any other electrical devices, issues may arise with its use, suddenly. It can be really frustrating to awaken to a chilly shower instead of a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. Luckily, we've made a checklist of feasible solutions to your hot water heater problems. There are a number of aspects that could create a number of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety. Whatever the trouble is, getting it repaired need to not position way too much of a problem if you adhere to these steps:

 

Call A Specialist:

If after replacing all malfunctioning parts as well as resetting your temperature, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been switched or it might be undersized for the amount of hot water required in your home. Whatever the instance may be, an expert plumber would certainly help fix the problem.

 

Inspect Your Power Supply:

As standard as this may appear, it is really required. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply transform it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these modifications to see if it's currently functioning.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and also press the red switch for temperature reset above the thermostat. This ought to assist warm the water. Transform the circuit breaker back on and inspect if the issue has actually been settled.

 

Examine the Burner in the Water Heater:

If it's not a power trouble, then try taking a look at your burner if it is still functioning. Examine each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that inspect whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Most of them result from minor issues like a blown fuse or worn-out heating element. Replacing the faulty components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you enjoyed reading our part about What Would Cause My Electric Water Heater to Stop Working?. Thank you for spending some time to browse our article post. Do you know another individual who is sincerely interested in the niche? Why not share it. Thanks a bunch for your time. Come back soon.

Schedule